RTG Single Downloads

L&M Instruments RTGOM is an all-inclusive product requiring simple USB connection and wizard-driven software installation to be up and running within minutes.  The product’s readme file, listed below as  “RTG OM Readme.pdf”, describes how to install the product in Windows and MAC environments.  This file also contains licensing information relative to the RTGOM device and its application software.

The “RTGOMApps v#-#-#.zip” file installs all the software available for Windows 7, 8 and 10 environments.

Except where otherwise noted, all of the documentation and software included in the package is copyrighted by L&M Instruments LLC.

Copyright (C) 2012-2018 L and M Instruments LLC. All rights reserved.

Before installing and using the software, the user must review and accept the L&M License Agreement.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

File

Description

RTG OM Readme Product readme with licensing information, installation information, and theory of operation for custom integrations.
L-and-M-Software-Suite-v2.3.9
Windows installable file containing all FREE software.
RTG-OM Firmware Upgrade Readme Installation instructions for RTGOM firmware.
RTGOM-3-1-4-7 Latest RTGOM firmware image.
RTGOM 3-1-2-3 “One-Back” RTGOM firmware image.     
RTG_Sample_Code 2016 08 25 C# Sample Code, with MIT License, for interfacing with the RTGOM devices.
RTGOM-Terminal-Access-on-Windows Instructions to use Hyperterminal or Putty to interface with the RTGOM on Windows (terminal access for MAC is documented in the RTG OM Readme.pdf above).
RTGOM RS485 Access on Windows Instructions to establish RS485 connectivity with RTGOM-02 devices, in Windows environments.
RTG-OM-Peripherals This file contains information on USB peripherals that L&M has used in conjunction with the RTGOM.
HYPERTRM Hyperterminal for Windows.  Tested on Windows XP/7/8.
RTGOM 9600 RTGOM “CLI” program running at 9600 baud, for testing RS485 connectivity on RTGOM-02 devices.
CLI 2.3.9 Interim CLI release to support both 115200 baud rate (standard) and 9600 baud rate (RS485 connectivity to RTGOM-02).

Standard usage:

CLI

9600 Baud Rate for RTGOM-02 RS485:

CLI 9600

FTDI CDM v2.12.00 V2.12.00 FTDI driver.
 RTGOM Win XP Latest Windows-XP Kits (no longer supported by L&M)

  1. Apps kit is built with Visual C++ 2010 (Visual C++ 2012 is used on later apps kits and not supported by XP).
  2. Firmware 2.0.1.2 is latest image to pair with Apps v2-1-9.