LMIOT Downloads

 

Except where otherwise noted, all of the documentation and software included on this page is copyrighted by L&M Instruments LLC.

Copyright (C) 2017-2019 L and M Instruments LLC. All rights reserved.

Before installing and using the software, the user must review and accept the L&M License Agreement.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

File Name Description
LMIOT ReadMe First LMIOT ReadMe First
LMIOT Quick Start Guide LMIOT Quick Start Guide
LMIOT User Guide LMIOT User Guide
lmiot-2-5-8

Latest LMIOT firmware image:

  • Spectrum calibration tuning (CCT improvement)
  • Open network support (leave password blank)
  • Manual SSID/PW function
  • Added SSID to IP Info screen
  • Flicker App screen 2 FFT raw data -> top 4 percentage
  • Flicker 1-20, 30+ at 10Hz buckets
  • Flicker Line Frequency filter settings 

Installation instructions:

  • Download the ZIP file
  • Unzip the file and copy to a USB drive
  • Power down the LMIOT device
  • Insert the USB drive into any LMIOT available slot
  • Power on the LMIOT device
  • Upon display cycling, confirm proper version number has been updated
  • Remove USB drive at any time after confirmed

Note: Having more than one lmiot-#-#-# file on the USB drive will cause the update to fail.  Ensure there is only the desired lmiot-#-#-# file on the USB drive.